Comparing E905 - Synthetic wax vs E905CI - Microcrystalline wax

Synonyms
E905
Synthetic wax
Hydrocarbon wax
Fischer-Tropsch wax
E905ci
Microcrystalline wax
Products

Found in 1,468 products

Found in 23 products

Search rank & volume
#317510 / mo🇺🇸U.S.
#2631.5K / mo🇺🇸U.S.
Awareness score

×0.05
under-aware

×8.01
over-aware

Search volume over time

Interest over time for 4 keywords in U.S. during the last 10 years.

Interest over time for 2 keywords in U.S. during the last 10 years.

Popular questions
  1. What is synthetic wax made of?

    E905 synthetic wax (microcrystalline/Fischer–Tropsch wax) is made of high–molecular‑weight saturated hydrocarbons—mainly branched isoparaffins and naphthenes—derived from petroleum refining or synthesis.

  2. How to remove candle wax from synthetic material?

    Let it harden, gently scrape off the excess, then sandwich the spot with paper towels and apply a warm iron to draw out the wax; treat any oily residue from paraffin/E905‑type waxes with dish soap or isopropyl alcohol before washing per the care label.

  3. What is synthetic wax in cosmetics?

    In cosmetics, E905‑type synthetic (microcrystalline) wax is a petroleum‑derived hydrocarbon wax used to thicken, structure, and add gloss or pay‑off to balms, sticks, and creams; highly refined grades are widely considered safe for topical use.

  4. Candles contain parafin wax, a hydrocarbon. when a test tube filled with cold water?

    Holding a cold test tube above a burning paraffin (E905‑type) wax candle causes water vapor from combustion to condense on it, and soot may deposit if combustion is incomplete; the flame’s main products are CO2 and H2O.

  5. Dia what does e905 mean\?

    E905 is the additive code for mineral hydrocarbon waxes (e.g., microcrystalline/paraffin/petrolatum) used mainly as glazing and release agents on foods; in some countries you may see subcodes (E905a–c) distinguishing specific types.

  1. What is microcrystalline wax made of?

    A mineral wax refined from petroleum residuals (de-oiled petrolatum), composed mainly of high–molecular-weight saturated hydrocarbons with branched and cyclic structures.

  2. 1 pound of microcrystalline wax weighs how much in everdur bronze?

    For the same volume, Everdur bronze (≈8.3–8.7 g/cm³) is about 9–10× denser than microcrystalline wax (≈0.90–0.95 g/cm³), so 1 lb of wax volume would weigh roughly 9–10 lb if cast in Everdur.

  3. At what temperature does microcrystalline wax melt?

    Typically about 60–90°C (140–194°F), depending on the grade; some hard grades approach ~95°C (203°F).

  4. How to determine the crystallinity of microcrystalline wax?

    Use differential scanning calorimetry (DSC) to estimate crystalline fraction from melting enthalpy and X‑ray diffraction (XRD/WAXS) to quantify crystalline versus amorphous phases; FTIR can provide supportive qualitative insight.

  5. How to make dark microcrystalline paste wax?

    Melt microcrystalline wax (optionally with 10–20% carnauba for hardness), then blend in odorless mineral spirits or turpentine to a paste consistency and disperse a small amount of carbon black or iron oxide pigment for color; mix thoroughly and cool, observing strict solvent fire-safety.