Comparing E552 - Calcium silicate vs E536 - Potassium ferrocyanide
Overview
Synonyms
Products
Found in 1,368 products
Found in 1 products
Search rank & volume
Awareness score
Search volume over time
Interest over time for 2 keywords in U.S. during the last 10 years.
Interest over time for 3 keywords in U.S. during the last 10 years.
Popular questions
How to remove calcium silicate from pool?
Calcium silicate scale is very hard and relatively acid‑resistant, so it’s typically removed by mechanical means (pumice/scale pads or bead blasting) after lowering pH and using a sequestering agent; an acid spot test that doesn’t fizz helps confirm it’s silicate, not carbonate. Prevent recurrence by keeping water balanced (pH/alkalinity/calcium) and using a sequestrant.
What is calcium silicate board?
A rigid, noncombustible building/insulation board made from calcium silicate hydrates, valued for fire resistance, moisture tolerance, and dimensional stability. It’s used for fireproofing, lining stoves/flues, and thermal or acoustic insulation.
How to cut calcium silicate board?
Score‑and‑snap works for thin sheets; thicker boards are cut with a circular saw using a carbide or diamond blade at a slow feed rate. Control dust with wet cutting or HEPA extraction and wear PPE (respirator, eye protection, gloves).
Is calcium silicate bad for you?
As a food additive (E552) used mainly as an anticaking agent, it’s considered safe at permitted levels (JECFA ADI “not specified”; FDA GRAS). The main concern is inhaling fine dust in occupational settings, which can irritate the respiratory tract.
Is calcium silicate vegan?
Yes—it's a mineral/synthetic ingredient with no animal-derived components, so E552 is generally suitable for vegans.
How to make potassium ferrocyanide?
It’s produced industrially from iron salts and cyanide chemistry under tightly controlled conditions; do not attempt to synthesize it yourself, and only food‑grade E536 from reputable suppliers is suitable for food use.
How could one ingest potassium ferrocyanide?
You don’t ingest it directly; when permitted, it’s present only in trace amounts as an anticaking agent in table salt (e.g., EU max 20 mg/kg salt), and normal dietary exposure via salt is considered safe.
How many grams of potassium ferrocyanide must be used to prepare 800.0ml of 6.00m solution?
A 6.00 M aqueous solution is not practically achievable due to solubility limits; in theory it would require about 2.03 kg of K4[Fe(CN)6]·3H2O for 0.800 L, which far exceeds what will dissolve.
How to dry potassium ferrocyanide?
Do not heat it to “dry” it—E536 is typically used as the trihydrate, and heating can decompose it and release toxic gases; for food use, simply store the sealed container in a dry place.
How to make .5m potassium ferrocyanide?
Using the common trihydrate, 0.5 M corresponds to about 211 g per liter of solution; this is a laboratory preparation and not a food‑use practice, so it should only be done with appropriate lab controls and PPE.