Comparing E536 - Potassium ferrocyanide vs E551 - Silicon dioxide

Synonyms
E536
Potassium ferrocyanide
Yellow prussiate of potash
E551
Silicon dioxide
Silica
SiO2
Products

Found in 1 products

Found in 241 products

Search rank & volume
#288910 / mo🇺🇸U.S.
#2490.6K / mo🇺🇸U.S.
Awareness score

×23.00
over-aware

×53.82
over-aware

Search volume over time

Interest over time for 3 keywords in U.S. during the last 10 years.

Interest over time for 4 keywords in U.S. during the last 10 years.

Popular questions
  1. How to make potassium ferrocyanide?

    It’s produced industrially from iron salts and cyanide chemistry under tightly controlled conditions; do not attempt to synthesize it yourself, and only food‑grade E536 from reputable suppliers is suitable for food use.

  2. How could one ingest potassium ferrocyanide?

    You don’t ingest it directly; when permitted, it’s present only in trace amounts as an anticaking agent in table salt (e.g., EU max 20 mg/kg salt), and normal dietary exposure via salt is considered safe.

  3. How many grams of potassium ferrocyanide must be used to prepare 800.0ml of 6.00m solution?

    A 6.00 M aqueous solution is not practically achievable due to solubility limits; in theory it would require about 2.03 kg of K4[Fe(CN)6]·3H2O for 0.800 L, which far exceeds what will dissolve.

  4. How to dry potassium ferrocyanide?

    Do not heat it to “dry” it—E536 is typically used as the trihydrate, and heating can decompose it and release toxic gases; for food use, simply store the sealed container in a dry place.

  5. How to make .5m potassium ferrocyanide?

    Using the common trihydrate, 0.5 M corresponds to about 211 g per liter of solution; this is a laboratory preparation and not a food‑use practice, so it should only be done with appropriate lab controls and PPE.

  1. Is silicon dioxide safe?

    Yes—food-grade silicon dioxide (E551), a synthetic amorphous silica used as an anti-caking agent, is permitted by regulators (e.g., FDA GRAS; EFSA found no concern at current uses) at typical food levels. This differs from inhaling crystalline silica dust, which is hazardous.

  2. What happens if you eat silica gel?

    Silica gel is an inert, amorphous silicon dioxide desiccant; if swallowed it usually passes through without being absorbed, though it can cause brief stomach upset or pose a choking risk. Indicator varieties (e.g., cobalt-dyed) aren’t meant to be eaten—seek advice if a child swallows a packet or a large amount.

  3. Is silicon dioxide bad for you?

    Not at the small amounts used in foods—E551 is considered safe and is largely not absorbed by the body. The main risk with silica is from inhaling crystalline silica dust, not ingesting food-grade amorphous silica.

  4. Is silica bad for you?

    In foods, amorphous silica (E551) used as an anti-caking agent is regarded as safe at permitted levels, and most ingested is excreted. Health concerns mainly relate to occupational inhalation of crystalline silica, which is hazardous.

  5. What is silica gel?

    Silica gel is a porous, amorphous form of silicon dioxide used as a desiccant to control moisture in packaging. It isn’t a food ingredient, and “Do not eat” labels are to prevent choking or misuse.